Приподнятая пластиковая стойка для солнечной энергии SRAA1-234P
This plastic solar road stud offers easy installation, large illuminated area, high brightness, and long lifespan. LED, photoluminescent and reflective, it overcomes the issues of small illuminated area and excessive flashing in traditional solar road stud. With a heavy duty aluminum case, it is great for all kinds of road edges.
Model: SRAA1-234P
Body Material: Monocrystalline silicon 5.5V 55MA
Reflective Material:Lithium polymer battery 3.7V 450mAh
Afterglow Intensity:Sequence, Flash, Synchronized flash, Constant on, customized mode
Время работы: более 72 часов после 8 часов воздействия солнечного света.
Size:116*110*21.5mm
Грузоподъемность:> 10 тонн
введение
- 3-in-1 luminance: Our raised solar road stud not only features LED lighting but also reflectivity, and, as an added bonus, it glows in the dark! This is a true environmentally friendly traffic safety solution that achieves our vision of “Zero Carbon Luminance”.
- Heavy Duty: The aluminum case makes it more durable and can withstand the weight of larger cars and trucks, ensuring a longer service life.
- Soft Illumination:Unlike traditional raised solar road stud, we’ve solved issues of excessive flashing. Our raised road markers have soft illumination and large glow area (with many LED and photoluminescent color choices). With multiple LED and glow in the dark color options, our solar road markers not only offer a more comfortable travel experience for drivers and walkers but also make urban environment more beautiful.
- Visual and Tactile Warning:This raised road stud not only provides visual guidance, but also gives tactile warnings for both cars and walkers, improving overall road safety.
- Простота установки и обслуживания: установка и обслуживание просты, пробки на дорогах минимальны.
спецификация
| Модель: | SRAA1-234P |
| Материал корпуса: | ПК |
| Солнечная панель: | Монокристаллический кремний 5,5 В 55 мА |
| Батарея: | Литий-полимерный аккумулятор 3,7 В, 450 мАч, цикл зарядки и разрядки более 1800 раз. |
| Часы работы: | При стандартной интенсивности освещения может работать непрерывно более 72 часов после 8 часов воздействия солнечного света. |
| Цвет светодиода: | Желтый, белый, другие цвета могут быть настроены |
| Фотолюминесцентный цвет: | Желто-зеленый, другие цвета могут быть настроены |
| Интенсивность послесвечения: | 10 минут > 1550mcd/m2,60min > 220MCD/M2,3H > 52MCD/M2 |
| Светоотражающая часть: | 43-бусины светоотражающие пластины из стеклянных бусин, 2 шт (белый/белый или желтый/белый) |
| Режим: | Постоянно горит, мигает, синхронно мигает; светоотражающий; Фотолюминесцентный |
| Активация: | 60-100люкс |
| Видимость: | > 300 метров |
| Грузоподъемность: | > 10 тонн |
| Водонепроницаемый Рейтинг: | IP68 |
| Операционная среда: | от -20°С до 70°С |
| Масса: | 465±10g |
| Размер: | 116*110*21.5mm |
| Срок службы: | 3 года (при нормальном использовании) |
приложение
Installation Location: Along the edges of all kinds of roads.
Способ установки:
Firstly, determine the installation position and drill a hole. The aperture should be 4mm larger than the diameter of the nail and the depth should exceed the length of the nail by 5mm. Clean the hole from accumulated dust, then insert and tamp the well-mixed glue into the hole. Apply epoxy resin glue to the bottom of the road stud, press firmly on both sides after placing it in the installation position to ensure a tight bond between the road stud and the road surface. After installing the road stud, remove excess glue around it using a trowel and clean the road surface thoroughly.
Precautions: Avoid touching the reflective sheet with hands, and prevent glue from adhering to the reflective sheet, which may affect its reflective effect. Do not install road studs on wet, damp, or oil-stained road surfaces, as they may easily come off. Remove the road cones after 4 hours of installation.
расследование
Пожалуйста, не стесняйтесь присылать нам информацию о вашем запросе. Мы свяжемся с вами как можно скорее.






