ソーラーガードレール反射板 SDB-457RP
モデル:RRA2-115CPT
Solar Panel: Monocrystalline silicon 5.5V 1.2W
Battery: Lithium polymer battery 3.7V 1000mAh
Mode: Synchronous flashing, Synchronous breathing, constant on, customized
作業時間: 8時間日光にさらした後72時間以上
Size: 250*135*93mm
導入
- 3-in-1 Luminance: Combining reflective, LED, and photoluminescent illumination, this solar guardrail represents an innovative from traditional products that rely only on reflectivity.
- Excellent Warning Effect: it reflects car headlights in low-light conditions, its LED activation serves as dynamic warning (with synchronized flashing or constant illumination), and its photoluminescent structure also provide self-illumination. It delivers a powerful warning effect for both drivers and pedestrians, enhancing road safety.
- High Brightness:Equipped with 14 high-brightness purple LED and 8 high-brightness yellow LEDs, it offers much higher LED brightness compared to other road markers.
- Dynamic Warning:Synchronized flashing LEDs, reflectivity and glow-in-the-dark functionality gives a powerful dynamic warning for both drivers and pedestrians, enhancing road safety.
- Easy Installation: Workers can easily installed it on guardrails with screw and the guardrail will not be damaged.
仕様
| モデル: | SDB-457RP |
| 本体材質: | ABS plastic case, PC clear lampshade |
| ソーラーパネル: | Monocrystalline silicon 5.5V 1.2W |
| バッテリー: | Lithium polymer battery 3.7V 1000mAh, cycle charge and discharge over 1800 times |
| 勤務時間: | 標準的な光強度の下では、8時間太陽光にさらした後でも72時間以上連続して動作できます。 |
| LED: | 14 yellow LED, 8 purple LED |
| モード: | Synchronous flashing, constant on, customization |
| 残光強度: | 10分> 1550mcd/m2、60min>220mcd/m2,3h >52mcd/m2 |
| Reflectivity: | Reflective lattice sheet |
| アクティベーション: | > 480 meters |
| 防水評価: | IP68 |
| 動作環境: | -20℃~70℃ |
| 重さ: | 480±10g |
| サイズ: | 250*135*93mm |
| 耐用年数: | 3年(通常使用の場合) |
応用
Recommended Installation Location: Along the side edge of w-beam guardrails.
インストール方法:
Remove the protective film or bag before using the product.Loosen the guardrail bolts, push the bolt caps along the product bracket slots, and tighten the bolt nuts to secure.
Product Maintenance:
Wipe off surface dust with a cloth. Do not use solvent-based solvents to wipe the product surface.
問い合わせ
お気軽にお問い合わせ情報をお送りください。できるだけ早くご連絡させていただきます。






