蓄光反射隆起プラスチック道路鋲 RRA1-111PF
A raised plastic road stud with glow in the dark and reflective functions. With its long glow time, great durability, and high reflective brightness, we recommend to use it for bike ways, parkways, rural areas, road edges and on sides of curbs.
Model: RRA1-111PF
Body Material: ABS
Reflective Material: Lattice reflective sheets (yellow-white or white-white)
残光強度：10分＞ 1550mcd/㎡、60分＞ 220mcd/㎡、3H ＞52mcd/㎡
Size:112*94*22mm
Load Capacity:＞25 tons
導入
This environmentally-friendly raised road stud is made by mixing our photoluminescent powder with resin and pouring it into the ABS base. It absorbs natural light during the day and can glow in the dark for over 12 hours. It also offers high reflectivity and superior resistance to water degradation and aging. It provides safety guidance to pedestrians, motorcyclists, and drivers through the night and adverse weather conditions.
Simple to install and require no maintenance, it is recommended to be used in rural roads, tunnels, bridges, sides of curbs and other locations.
仕様
| モデル： | RRA1-111PF |
| 本体材質: | ABS |
| 反射的マティエル： | Lattice reflective sheets (yellow-white or white-white) |
| Photoluminescent Color： | 黄緑色 |
| 残光強度: | 10分＞1550mcd/㎡、60分＞220mcd/㎡、3時間＞52mcd/㎡ |
| 負荷容量： | >25 tons |
| 動作温度： | -20℃～70℃ |
| サイズ： | 112*94*22mm |
| 重さ： | 136g |
| 耐用年数： | 5年（通常の使用中） |
応用
Recommended Installation Location: Bike lanes, greenways, rural areas, tunnels, bridges, sides of curbs etc.
Installation method: First, determine the installation position and clean the road surface thoroughly. Then, use epoxy structural adhesive and screws to secure it to the ground.
Precautions: Avoid getting adhesive on the reflective surface to prevent interference with its reflective effect. Do not use solvent-based solvents to wipe the surface of the product.
問い合わせ
お気軽にお問い合わせ情報をお送りください。できるだけ早くご連絡させていただきます。
関連製品
-
反射ロードスタッド反射的なプラスチックロードスタッドRRA1-003
-
反射ロードスタッド反射的なプラスチックロードスタッドRRA1-002
-
アルミニウム製ロードスタッド反射的なプラスチックロードスタッドRRA1-002
-
ソーラーガードレールリフレクターガードレールリフレクターRDA-001