Solar Guardrail Reflector SDB-457RP
Model: RRA2-115CPT
Solar Panel: Monocrystalline silicon 5.5V 1.2W
Battery: Lithium polymer battery 3.7V 1000mAh
Mode: Synchronous flashing, Synchronous breathing, constant on, customized
Oras ng Trabaho: Higit sa 72 oras pagkatapos ng 8 oras ng pagkakalantad sa sikat ng araw
Size: 250*135*93mm
panimula
- 3-in-1 Luminance: Combining reflective, LED, and photoluminescent illumination, this solar guardrail represents an innovative from traditional products that rely only on reflectivity.
- Excellent Warning Effect: it reflects car headlights in low-light conditions, its LED activation serves as dynamic warning (with synchronized flashing or constant illumination), and its photoluminescent structure also provide self-illumination. It delivers a powerful warning effect for both drivers and pedestrians, enhancing road safety.
- High Brightness:Equipped with 14 high-brightness purple LED and 8 high-brightness yellow LEDs, it offers much higher LED brightness compared to other road markers.
- Dynamic Warning:Synchronized flashing LEDs, reflectivity and glow-in-the-dark functionality gives a powerful dynamic warning for both drivers and pedestrians, enhancing road safety.
- Easy Installation: Workers can easily installed it on guardrails with screw and the guardrail will not be damaged.
pagtutukoy
| Modelo: | SDB-457RP |
| Materyal ng Katawan: | ABS plastic case, PC clear lampshade |
| Solar Panel: | Monocrystalline silicon 5.5V 1.2W |
| Baterya: | Lithium polymer battery 3.7V 1000mAh, cycle charge and discharge over 1800 times |
| Oras ng Trabaho: | Sa ilalim ng standard light intensity, ay maaaring gumana nang patuloy sa loob ng higit sa 72 oras pagkatapos ng 8 oras ng pagkakalantad sa sikat ng araw |
| LED: | 14 yellow LED, 8 purple LED |
| Mode: | Synchronous flashing, constant on, customization |
| Intensity ng Afterglow: | 10min>1550mcd/m2,60min>220mcd/m2,3h>52mcd/m2 |
| Reflectivity: | Reflective lattice sheet |
| Pag-activate: | > 480 meters |
| Hindi tinatagusan ng tubig Rating: | IP68 |
| Kapaligiran ng Pagpapatakbo: | -20°C hanggang 70°C |
| Timbang: | 480±10g |
| Sukat: | 250*135*93mm |
| Buhay ng Paglilingkod: | 3 taon (sa ilalim ng normal na paggamit) |
Paglalapat
Recommended Installation Location: Along the side edge of w-beam guardrails.
Installation Method:
Remove the protective film or bag before using the product.Loosen the guardrail bolts, push the bolt caps along the product bracket slots, and tighten the bolt nuts to secure.
Product Maintenance:
Wipe off surface dust with a cloth. Do not use solvent-based solvents to wipe the product surface.
pagtatanong
Mangyaring huwag mag atubiling isumite ang iyong impormasyon sa pagtatanong sa amin. Makikipag ugnayan kami sa iyo sa lalong madaling panahon.






