Solar Guardrail Reflector SDA-456RP
This solar guardrail marking incorporates reflectivity, LED, and photoluminescent features. It is designed to be installed in the middle section of the w-beam guardrail. It is very effective in curved roads, mountainous areas, and regions with multiple turns, significantly reducing the likelihood of traffic accidents.
Model: SDA-456RP
Solar Panel: Monocrystalline silicon 5.5V 48MA
Baterya: Lithium polymer baterya 3.7V 450mAh
Mode: Synchronous flashing, alternately flash, constant on, customization
Oras ng Trabaho: Higit sa 72 oras pagkatapos ng 8 oras ng pagkakalantad sa sikat ng araw
Size: 126*80*95mm
panimula
- 3-in-1 Luminance: Combining reflective, LED, and photoluminescent illumination, this solar guardrail represents an innovative from traditional products that rely only on reflectivity.
- Excellent Warning Effect: it reflects car headlights in low-light conditions, its LED activation serves as dynamic warning (with synchronized flashing or constant illumination), and its photoluminescent structure also provide self-illumination. It delivers a powerful warning effect for both drivers and pedestrians, enhancing road safety.
- High Brightness:Equipped with 14 high-brightness purple LED and 8 high-brightness yellow LEDs, it offers much higher LED brightness compared to other road markers.
- Dynamic Warning:Synchronized flashing LEDs, reflectivity and glow-in-the-dark functionality gives a powerful dynamic warning for both drivers and pedestrians, enhancing road safety.
- Easy Installation: Workers can easily installed it on guardrails with screw and the guardrail will not be damaged.
pagtutukoy
| Modelo: | SDA-456RP |
| Materyal ng Katawan: | PC case |
| Solar Panel: | Monocrystalline silicon 5.5V 48MA |
| Baterya: | Lithium polymer battery 3.7V 450mAh, cycle charge at discharge sa paglipas ng 1800 beses |
| Oras ng Trabaho: | Sa ilalim ng standard light intensity, ay maaaring gumana nang patuloy sa loob ng higit sa 72 oras pagkatapos ng 8 oras ng pagkakalantad sa sikat ng araw |
| LED: | 3 yellow LED, 3 blue LED |
| Mode: | Synchronous flashing, alternately flash, constant on, customization |
| Reflectivity: | Micro-prismatic reflective film |
| Intensity ng Afterglow: | 10min>1550mcd/m2,60min>220mcd/m2,3h>52mcd/m2 |
| Pag-activate: | 60-100Lux |
| Visibility: | > 500 metro |
| Hindi tinatagusan ng tubig Rating: | IP68 |
| Kapaligiran ng Pagpapatakbo: | -20°C hanggang 70°C |
| Timbang: | 350±10g |
| Sukat: | 126*80*95mm |
| Buhay ng Paglilingkod: | 3 taon (sa ilalim ng normal na paggamit) |
Paglalapat
Recommended Installation Location: in the middle part of the w-beam guardrail.
Paraan ng Pag-install:
Alisin ang protective film o bag bago gamitin ang produkto. Maluwag ang mga bolts ng guardrail, itulak ang mga takip ng bolt sa mga puwang ng bracket ng produkto, at higpitan ang mga bolt nuts upang ma-secure.
Pagpapanatili ng Produkto:
Punasan ang alikabok sa ibabaw gamit ang isang tela. Huwag gumamit ng mga solvent na nakabatay sa solvent upang punasan ang ibabaw ng produkto.
pagtatanong
Mangyaring huwag mag atubiling isumite ang iyong impormasyon sa pagtatanong sa amin. Makikipag ugnayan kami sa iyo sa lalong madaling panahon.






