Nakataas na Aluminum Solar Road Stud SRAA1-236T
This aluminum solar road stud offers easy installation, large illuminated area, high brightness, and long work hour. It overcomes the issues of small illuminated area and excessive flashing in traditional solar road markers, making it suitable for use on all kinds of road edges.
Model: SRAA1-236T
Body Material: Monocrystalline silicon 5.5V 55MA
Reflective Material: Lithium polymer battery 3.7V 450mAh
Afterglow Intensity:Sequence, Flash, Synchronized flash, Constant on, customized mode
Oras ng Trabaho: Higit sa 72 oras pagkatapos ng 8 oras ng pagkakalantad sa sikat ng araw
Size:122*117*25mm
Load Capacity:>10 tons
panimula
- Heavy Duty: The aluminum case makes it more durable and can withstand the weight of larger cars and trucks, ensuring a longer service life.
- Longer Work Hour: With a much bigger solar panel than similar products, our solar road stud can save more solar power, therefore, works much longer.
- 70% Higher Luminosity: With our patented light distribution designs, this road stud has larger illumination angle and higher utilization of solar energy, making it 70% brighter than competing product. Because of its special angle, its LED light can be seen by both drivers and walkers, while others can only be seen by drivers.
- Soft Illumination:No more excessive flashing. Our raised road markers have soft illumination and many LED and glow in the dark color options. It can not only offer a more comfortable travel experience for drivers and walkers but also make urban environment more beautiful.
- Visual and Tactile Warning:This raised road stud not only provides visual guidance, but also gives tactile warnings for both cars and walkers, improving overall road safety.
- Easy Installation and Maintenance: Installation and maintenance is easy with minimal road congestion.
pagtutukoy
| Modelo: | SRAA1-236T |
| Materyal ng Katawan: | Aluminyo |
| Solar Panel: | Monocrystalline siliniyum 5.5V 55MA |
| Baterya: | Lithium polymer battery 3.7V 450mAh, cycle charge at discharge sa paglipas ng 1800 beses |
| Oras ng Trabaho: | Sa ilalim ng standard light intensity, ay maaaring gumana nang patuloy sa loob ng higit sa 72 oras pagkatapos ng 8 oras ng pagkakalantad sa sikat ng araw |
| Kulay ng LED: | Ang dilaw, puti, iba pang mga kulay ay maaaring ipasadya |
| Bahagi ng Reflective: | 43-bead glass beads reflective sheet, 2 pieces (white/white or yellow/white) |
| Mode: | Constant on, Flashing, Synchronous flashing ;Reflective |
| Pag-activate: | 60-100Lux |
| Visibility: | > 300 metro |
| Kapasidad ng Pag load: | > 10 tons |
| Hindi tinatagusan ng tubig Rating: | IP68 |
| Kapaligiran ng Pagpapatakbo: | -20°C hanggang 70°C |
| Timbang: | 465±10g |
| Sukat: | 122*117*25mm |
| Buhay ng Paglilingkod: | 3 taon (sa ilalim ng normal na paggamit) |
Paglalapat
Installation Location: Along the edges of all kinds of roads.
Paraan ng Pag-install:
Firstly, determine the installation position and drill a hole. The aperture should be 4mm larger than the diameter of the nail and the depth should exceed the length of the nail by 5mm. Clean the hole from accumulated dust, then insert and tamp the well-mixed glue into the hole. Apply epoxy resin glue to the bottom of the road stud, press firmly on both sides after placing it in the installation position to ensure a tight bond between the road stud and the road surface. After installing the road stud, remove excess glue around it using a trowel and clean the road surface thoroughly.
Precautions: Avoid touching the reflective sheet with hands, and prevent glue from adhering to the reflective sheet, which may affect its reflective effect. Do not install road studs on wet, damp, or oil-stained road surfaces, as they may easily come off. Remove the road cones after 4 hours of installation.
pagtatanong
Mangyaring huwag mag atubiling isumite ang iyong impormasyon sa pagtatanong sa amin. Makikipag ugnayan kami sa iyo sa lalong madaling panahon.







