Solar Guardrail Reflector SDA-456RP
This solar guardrail marking incorporates reflectivity, LED, and photoluminescent features. It is designed to be installed in the middle section of the w-beam guardrail. It is very effective in curved roads, mountainous areas, and regions with multiple turns, significantly reducing the likelihood of traffic accidents.
Model: SDA-456RP
Solar Panel: Monocrystalline silicon 5.5V 48MA
Battery: Lithium polymer battery 3.7V 450mAh
Mode: Synchronous flashing, alternately flash, constant on, customization
Work Hour: Over 72 hours after 8 hours of sunlight exposure
Size: 126*80*95mm
introduction
- 3-in-1 Luminance: Combining reflective, LED, and photoluminescent illumination, this solar guardrail represents an innovative from traditional products that rely only on reflectivity.
- Excellent Warning Effect: it reflects car headlights in low-light conditions, its LED activation serves as dynamic warning (with synchronized flashing or constant illumination), and its photoluminescent structure also provide self-illumination. It delivers a powerful warning effect for both drivers and pedestrians, enhancing road safety.
- High Brightness:Equipped with 14 high-brightness purple LED and 8 high-brightness yellow LEDs, it offers much higher LED brightness compared to other road markers.
- Dynamic Warning:Synchronized flashing LEDs, reflectivity and glow-in-the-dark functionality gives a powerful dynamic warning for both drivers and pedestrians, enhancing road safety.
- Easy Installation: Workers can easily installed it on guardrails with screw and the guardrail will not be damaged.
specification
| Model: | SDA-456RP |
| Body Material: | PC case |
| Solar Panel: | Monocrystalline silicon 5.5V 48MA |
| Battery: | Lithium polymer battery 3.7V 450mAh, cycle charge and discharge over 1800 times |
| Work Hour: | Under standard light intensity, can work continuously for over 72 hours after 8 hours of sunlight exposure |
| LED: | 3 yellow LED, 3 blue LED |
| Mode: | Synchronous flashing, alternately flash, constant on, customization |
| Reflectivity: | Micro-prismatic reflective film |
| Afterglow Intensity: | 10min＞1550mcd/m2，60min＞220mcd/m2,3h＞52mcd/m2 |
| Activation: | 60-100Lux |
| Visibility: | > 500 meters |
| Waterproof Rating: | IP68 |
| Operating Environment: | -20°C to 70°C |
| Weight: | 350±10g |
| Size: | 126*80*95mm |
| Service Life: | 3 years (under normal usage) |
application
Recommended Installation Location: in the middle part of the w-beam guardrail.
Installation Method:
Remove the protective film or bag before using the product.Loosen the guardrail bolts, push the bolt caps along the product bracket slots, and tighten the bolt nuts to secure.
Product Maintenance:
Wipe off surface dust with a cloth. Do not use solvent-based solvents to wipe the product surface.
inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
RELATED PRODUCTS
-
Reflective Road StudReflective Plastic Road Stud RRA1-003
-
Reflective Road StudReflective Plastic Road Stud RRA1-002
-
Aluminum Road StudReflective Plastic Road Stud RRA1-002
-
Solar Guardrail ReflectorGuardrail Reflector RDA-001