Solar Traffic Bollard Top Marker SCB-553R
Our solar traffic bollard top marker is designed to be installed atop traffic warning posts, delivering warnings to both drivers and pedestrians. We innovatively combined LED and reflective features. Offering high luminosity, minimal glare, long visibility range, and 360-degree illumination.
Model: SCB-553R
Solar Panel: Monocrystalline silicon 5.5V 50MA
Battery: Lithium polymer battery 3.7V 600mAh
Mode: Sequence, Flash, Synchronized flash, customized mode; Reflective
Work Hour: Over 72 hours after 8 hours of sunlight exposure
Size:D132.5*54mm
Visibility: >500m
introduction
This solar self-luminous traffic warning product is designed to be installed atop traffic warning bollards. We innovative combined LED lighting, reflection, and glow in the dark functions.
Suitable for traffic posts on all kinds of roads. Its advantages include easy installation, long lifespan, easy maintenance, low glare, and 360-degree all around illumination.
It not only beatifies urban environment, but also provides strong dynamic warnings and safety guidance for pedestrian and drivers. It can effectively reduce the chances of traffic accidents.
specification
| Model: | SCB-553R |
| Solar Panel: | Monocrystalline silicon 5.5V 0.8W |
| Battery: | Lithium polymer battery 3.7V 600mAh, cycle charge and discharge over 1800 times |
| Work Hour: | Under standard light intensity, can work continuously for over 72 hours after 8 hours of sunlight exposure |
| LED Color: | 24 yellow LEDs, 24 blue LEDs |
| Reflective Part: | Microprismatic National Standard Class IV Reflective Film |
| Mode: | Sequence, Flash, Synchronized flash, customized mode; Reflective |
| Activation: | 60-100Lux |
| Visibility: | > 500 meters |
| Waterproof Rating: | IP68 |
| Operating Environment: | -20°C to 70°C |
| Weight: | 390±10g |
| Size: | D132.5*54mm |
| Application: | Traffic warning bollard with 130mm diameter |
| Service Life: | 3 years (under normal usage) |
application
Installation Location: Traffic warning bollard with 130mm diameter
Installation:
- Remove the protective film or bag before using the product.
- Apply adhesive evenly inside the bottom groove and install it on the post head. Drill holes and rivet nails for fixation before the adhesive solidifies according to the actual situation.
- Product Maintenance: Wipe the surface dust with a cloth. Do not wipe the surface of the product with solvent-based solvents.
inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
RELATED PRODUCTS
-
Reflective Road StudReflective Plastic Road Stud RRA1-003
-
Reflective Road StudReflective Plastic Road Stud RRA1-002
-
Aluminum Road StudReflective Plastic Road Stud RRA1-002
-
Solar Guardrail ReflectorGuardrail Reflector RDA-001