Raised Aluminum Solar Road Stud SRAA1-236T
This aluminum solar road stud offers easy installation, large illuminated area, high brightness, and long work hour. It overcomes the issues of small illuminated area and excessive flashing in traditional solar road markers, making it suitable for use on all kinds of road edges.
Model: SRAA1-236T
Body Material: Monocrystalline silicon 5.5V 55MA
Reflective Material: Lithium polymer battery 3.7V 450mAh
Afterglow Intensity:Sequence, Flash, Synchronized flash, Constant on, customized mode
Work Hour: Over 72 hours after 8 hours of sunlight exposure
Size:122*117*25mm
Load Capacity:＞10 tons
introduction
- Heavy Duty: The aluminum case makes it more durable and can withstand the weight of larger cars and trucks, ensuring a longer service life.
- Longer Work Hour: With a much bigger solar panel than similar products, our solar road stud can save more solar power, therefore, works much longer.
- 70% Higher Luminosity: With our patented light distribution designs, this road stud has larger illumination angle and higher utilization of solar energy, making it 70% brighter than competing product. Because of its special angle, its LED light can be seen by both drivers and walkers, while others can only be seen by drivers.
- Soft Illumination:No more excessive flashing. Our raised road markers have soft illumination and many LED and glow in the dark color options. It can not only offer a more comfortable travel experience for drivers and walkers but also make urban environment more beautiful.
- Visual and Tactile Warning:This raised road stud not only provides visual guidance, but also gives tactile warnings for both cars and walkers, improving overall road safety.
- Easy Installation and Maintenance: Installation and maintenance is easy with minimal road congestion.
specification
| Model: | SRAA1-236T |
| Body Material: | Aluminum |
| Solar Panel: | Monocrystalline silicon 5.5V 55MA |
| Battery: | Lithium polymer battery 3.7V 450mAh, cycle charge and discharge over 1800 times |
| Work Hour: | Under standard light intensity, can work continuously for over 72 hours after 8 hours of sunlight exposure |
| LED Color: | Yellow, white, other colors can be customized |
| Reflective Part: | 43-bead glass beads reflective sheet, 2 pieces (white/white or yellow/white) |
| Mode: | Constant on, Flashing, Synchronous flashing ;Reflective |
| Activation: | 60-100Lux |
| Visibility: | > 300 meters |
| Load Capacity: | > 10 tons |
| Waterproof Rating: | IP68 |
| Operating Environment: | -20°C to 70°C |
| Weight: | 465±10g |
| Size: | 122*117*25mm |
| Service Life: | 3 years (under normal usage) |
application
Installation Location: Along the edges of all kinds of roads.
Installation Method:
Firstly, determine the installation position and drill a hole. The aperture should be 4mm larger than the diameter of the nail and the depth should exceed the length of the nail by 5mm. Clean the hole from accumulated dust, then insert and tamp the well-mixed glue into the hole. Apply epoxy resin glue to the bottom of the road stud, press firmly on both sides after placing it in the installation position to ensure a tight bond between the road stud and the road surface. After installing the road stud, remove excess glue around it using a trowel and clean the road surface thoroughly.
Precautions: Avoid touching the reflective sheet with hands, and prevent glue from adhering to the reflective sheet, which may affect its reflective effect. Do not install road studs on wet, damp, or oil-stained road surfaces, as they may easily come off. Remove the road cones after 4 hours of installation.
inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
RELATED PRODUCTS
-
Reflective Road StudReflective Plastic Road Stud RRA1-003
-
Reflective Road StudReflective Plastic Road Stud RRA1-002
-
Aluminum Road StudReflective Plastic Road Stud RRA1-002
-
Solar Guardrail ReflectorGuardrail Reflector RDA-001